Presented verbatim from the original text.
Atari ST/STe/MSTe/TT/F030 Hardware Register Listing
EXCLUSIVE ST-NEWS VERSION
Version 7.0 (FINAL REVISION) - 1/22/94 By Dan Hollis Copyright © 1993⁄1994 MicroImages Software
THIS IS THE LAST VERSION OF THE LISTING TO BE DISTRIBUTED
Due to the absence of feedback, combined with the lack of free time, I will no longer be updating this listing. This is the FINAL revision.
This document may only be copied unmodified, in its entirety. This document may ONLY be copied freely, and may NOT be sold. I make no guarantees as to the accuracy of this document. I cannot be responsible for the use or misuse of information contained within this document. Use at your own risk! Regardless, every effort has been taken to ensure this document is as complete and accurate as possible.
This document is dedicated to abolishing the idea that programming information for the Atari should be held under lock and key and only be accessable to an elite few (for a price!). Free programming documentation promotes the life of the Atari!
Many thanks to the following people for their contributions!
Markus Gutschke, Alexander Herzlinger, Karsten Isakovic, Thomas Binder, Julian Reschke, Georges Kesseler, Torbjoern Ose, Rickard Troedsson, Martin Griffiths, Eric Prevoteau
Any comments or questions can be sent to me at the following addresses:
InterNet :
- goemon@venice.mps.ohio-state.edu (preferred)
- dhollis@bitsink.gbdata.com
GEnie : Use the internet email facility, please!
CompuServe : Use the internet email facility, please!
Snail :
Dan Hollis
744 NW Kinney
Grants Pass, OR 97526
Address Description Space
-------+----------------------------------------------------------------+-----
########CPU Reset Vectors ######
-------+----------------------------------------------------------------+-----
$000000|Reset : Initial SSP |SP
$000004|Reset : Initial PC |SP
-------+----------------------------------------------------------------+-----
########CPU Exception Vectors ######
-------+----------------------------------------------------------------+-----
$000008|Bus Error |SD
$00000C|Address Error |SD
$000010|Illegal Instruction |SD
$000014|Zero Divide |SD
$000018|CHK, CHK2 Instruction |SD
$00001C|cpTRAPcc, TRAPcc, TRAPV |SD
$000020|Privilege Violation |SD
$000024|Trace |SD
$000028|Line 1010 Emulator (LineA) |SD
$00002C|Line 1111 Emulator (LineF) |SD
$000030|(Unassigned, Reserved) |SD
$000034|Coprocessor Protocol Violation (68030) |SD
$000038|Format Error (68010) |SD
$00003C|Uninitialized Interrupt Vector |SD
$000040|(Unassigned, Reserved) |SD
: | : : | :
$00005F|(Unassigned, Reserved) |SD
$000060|Spurious Interrupt (Bus error during interrupt) |SD
-------+----------------------------------------------------------------+-----
########Auto-Vector Interrupts ######
-------+----------------------------------------------------------------+-----
$000064|Level 1 Int Autovector (TT VME) |SD
$000068|Level 2 Int Autovector (HBL) |SD
$00006C|Level 3 Int Autovector (TT VME) |SD
$000070|Level 4 Int Autovector (VBL) |SD
$000074|Level 5 Int Autovector |SD
$000078|Level 6 Int Autovector (MFP) |SD
$00007C|Level 7 Int Autovector |SD
-------+----------------------------------------------------------------+-----
########Trap Instruction Vectors (Trap #n = Vector number + 32 + n) ######
-------+----------------------------------------------------------------+-----
$000080|Trap #0 |SD
$000084|Trap #1 (GemDOS) |SD
$000088|Trap #2 (AES/VDI) |SD
$00008C|Trap #3 |SD
$000090|Trap #4 |SD
$000094|Trap #5 |SD
$000098|Trap #6 |SD
$00009C|Trap #7 |SD
$0000A0|Trap #8 |SD
$0000A4|Trap #9 |SD
$0000A8|Trap #10 |SD
$0000AC|Trap #11 |SD
$0000B0|Trap #12 |
$0000B4|Trap #13 (BIOS) |SD
$0000B8|Trap #14 (XBIOS) |SD
-------+----------------------------------------------------------------+-----
########Math Coprocessor Vectors (68881/68882/Internal) ######
-------+----------------------------------------------------------------+-----
$0000C0|FFCP Branch or Set on Unordered Condition |SD
$0000C4|FFCP Inexact Result |SD
$0000C8|FFCP Divide by Zero |SD
$0000CC|FFCP Underflow |SD
$0000D0|FFCP Operand Error |SD
$0000D4|FFCP Overflow |SD
$0000D8|FFCP Signaling NAN |SD
$0000DC|(Unassigned, Reserved) |SD
-------+----------------------------------------------------------------+-----
########PMMU Coprocessor Vectors (68851/Internal) ######
-------+----------------------------------------------------------------+-----
$0000E0|MMU Configuration Error |SD
$0000E4|MC68851, not used by MC68030 |SD
$0000E8|MC68851, not used by MC68030 |SD
-------+----------------------------------------------------------------+-----
########Miscellaneous Vectors ######
-------+----------------------------------------------------------------+-----
$0000EC|(Unassigned, Reserved) |SD
: | : : | :
$0000FF|(Unassigned, Reserved) |SD
-------+----------------------------------------------------------------+-----
########User Assigned Interrupt Vectors ######
-------+----------------------------------------------------------------+-----
$000100|ST-MFP-0 - Centronics busy |SD
$000104|ST-MFP-1 - RS-232 DCD |SD
$000108|ST-MFP-2 - RS-232 CTS |SD
$00010C|ST-MFP-3 - Blitter done |SD
$000110|ST-MFP-4 - Timer D (USART timer) |SD
$000114|ST-MFP-5 - Timer C (200hz Clock) |SD
$000118|ST-MFP-6 - Keyboard/MIDI (ACIA) |SD
$00011C|ST-MFP-7 - FDC/HDC |SD
$000120|ST-MFP-8 - Timer B (HBL) |SD
$000124|ST-MFP-9 - Send Error |SD
$000128|ST-MFP-10 - Send buffer empty |SD
$00012C|ST-MFP-11 - Receive error |SD
$000130|ST-MFP-12 - Receive buffer full |SD
$000134|ST-MFP-13 - Timer A (STe sound) |SD
$000138|ST-MFP-14 - RS-232 Ring detect |SD
$00013C|ST-MFP-15 - GPI7 - Monochrome Detect |SD
$000140|TT-MFP-0 - GPI 0 |SD
$000144|TT-MFP-1 - GPI 1 |SD
$000148|TT-MFP-2 - SCC-DMA Controller |SD
$00014C|TT-MFP-3 - Ring Indicator SCC B |SD
$000150|TT-MFP-4 - Timer D |SD
$000154|TT-MFP-5 - Timer C |SD
$000158|TT-MFP-6 - (Reserved) GPI 4 |SD
$00015C|TT-MFP-7 - SCSI DMA Controller |SD
$000160|TT-MFP-8 - Timer B |SD
$000164|TT-MFP-9 - Send Error |SD
$000168|TT-MFP-10 - Send buffer empty |SD
$00016C|TT-MFP-11 - Receive error |SD
$000170|TT-MFP-12 - Receive buffer full |SD
$000174|TT-MFP-13 - Timer A |SD
$000176|TT-MFP-14 - TT Clock (MC146818A) |SD
$00017C|TT-MFP-15 - TT-SCSI Drive Controller NCR 5380 |SD
$000180|SCC Interrupt |SD
$0001BC|SCC Interrupt |SD
$0001C0|User Defined, Unused |SD
: | : : : | :
$0003FC|User Defined, Unused |SD
-------+----------------------------------------------------------------+-----
Address Size Description Name
-------+-----+-----------------------------------------------------+----------
##############System Crash Page ###########
-------+-----+-----------------------------------------------------+----------
$000380|long |Validates System Crash Page if $12345678 |proc_lives
$000384|.....|Saved registers D0-D7 |proc_dregs
$0003A4|.....|Saved registers A0-A7 |proc_aregs
$0003C4|long |Vector number of crash exception |proc_enum
$0003C8|long |Saved USP |proc_usp
$0003CC|.....|Saved 16 words from exception stack |proc_stk
-------+-----+-----------------------------------------------------+----------
##############System Variables ###########
-------+-----+-----------------------------------------------------+----------
$000400|long |GEM Event timer vector |etv_timer
$000404|long |GEM Critical error handler |etv_critic
$000408|long |GEM Program termination vector |etv_term
$00040C|long |GEM Additional vector #1 (Unused) |etv_xtra
: | : | : : : : : | :
$00041C|long |GEM Additional vector #5 (Unused) |etv_xtra
$000420|long |Validates memory configuration if $752019F3 |memvalid
$000424|word |Copy of contents of $FF8001 |memctrl
$000426|long |Validates resvector if $31415926 |resvalid
$00042A|long |Reset vector |resvector
$00042E|long |Physical top of RAM |phystop
$000432|long |Start of TPA (user memory) |_membot
$000436|long |End of TPA (user memory) |_memtop
$00043A|long |Validates memcntrl and memconf if $237698AA |memval2
$00043E|word |If nonzero, floppy disk VBL routine is disabled |flock
$000440|word |Floppy Seek rate - 0:6ms, 1:12ms, 2:2ms, 3:3ms |seekrate
$000442|word |Time between two timer calls (in milliseconds) |_timer_ms
$000444|word |If not zero, verify floppy disk writes |_fverify
$000446|word |Default boot device |_bootdev
$000448|word |0 - NTSC (60hz), <>0 - PAL (50hz) |palmode
$00044A|word |Default video resolution |defshiftmod
$00044C|word |Copy of contents of $FF8260 |sshiftmod
$00044E|long |Pointer to video RAM (logical screen base) |_v_bas_ad
$000452|word |If not zero, VBL routine is not executed |vblsem
$000454|word |Number of vertical blank routines |nvbls
$000456|long |Pointer to list of vertical blank routines |_vblqueue
$00045A|long |If not zero, points to color palette to be loaded |colorptr
$00045E|long |If not zero, points to video ram for next VBL |screenpt
$000462|long |Counter for number of VBLs |_vbclock
$000466|long |Number of VBL routines executed |_frclock
$00046A|long |Vector for hard disk initialization |hdv_init
$00046E|long |Vector for resolution change |swv_vec
$000472|long |Vector for getbpb for hard disk |hdv_bpb
$000476|long |Vector for read/write routine for hard disk |hdv_rw
$00047A|long |Vector for hard disk boot |hdv_boot
$00047E|long |Vector for hard disk media change |hdv_mediach
$000482|word |If not zero, attempt to load "COMMAND.PRG" on boot |_comload
$000484|byte |Attribute vector for console output BIT 3 2 1 0|conterm
| |Return "kbshift" for BIOS conin --------------' | | ||
| |System bell (1 - on) ---------------------------' | ||
| |Key repeat (1 - on) ------------------------------' ||
| |Key click (1 - on) ---------------------------------'|
$000486|long |Return address for TRAP #14 (unused)|trp14ret
$00048A|long |Return address for critical error handler (unused)|criticret
$00048E|long |Memory descriptor block |themd
$00049E|long |Space for additional memory descriptors |themdmd
$0004A2|long |Pointer to BIOS save registers block |savptr
$0004A6|word |Number of connected floppy drives |_nflops
$0004A8|long |Vector for screen output |con_state
$0004AC|word |Temporary storage for cursor line position |save_row
$0004AE|long |Pointer to save area for exception processing |sav_context
$0004B2|long |Pointer to buffer control block for GEMDOS data |_bufl
$0004B6|long |Pointer to buffer control block for GEMDOS fat/dir |_bufl
$0004BA|long |Counter for 200hz system clock |_hz_200
$0004BC|long |Pointer to default environment string |the_env
$0004C2|long |Bit allocation for physical drives (bit 0=A, 1=B..) |_drvbits
$0004C6|long |Pointer to 1024-byte disk buffer |_dskbufp
$0004CA|long |Pointer to autoexecute path |_autopath
$0004CE|long |Pointer to VBL routine #1 |_vbl_lis
: | : | : : : : : | :
$0004EA|long |Pointer to VBL routine #8 |_vbl_lis
$0004EE|word |Flag for screen -> printer dump |_dumpflg
$0004F0|word |Printer abort flag |_prtabt
$0004F2|long |Pointer to start of OS |_sysbase
$0004F6|long |Global shell pointer |_shell_p
$0004FA|long |Pointer to end of OS |end_os
$0004FE|long |Pointer to entry point of OS |exec_os
$000502|long |Pointer to screen dump routine |scr_dump
$000506|long |Pointer to _lstostat() |prv_lsto
$00050A|long |Pointer to _lstout() |prv_lst
$00050E|long |Pointer to _auxostat() |prv_auxo
$000512|long |Pointer to _auxout() |prv_aux
$000516|long |If AHDI, pointer to pun_info |pun_ptr
$00051A|long |If $5555AAAA, reset |memval3
$00051E|long |8 Pointers to input-status routines |xconstat
$00053E|long |8 Pointers to input routines |xconin
$00055E|long |8 Pointers to output-status routines |xcostat
$00057E|long |8 Pointers to output routines |xconout
$00059E|word |If not 0, then not 68000 - use long stack frames |_longframe
$0005A0|long |Pointer to cookie jar |_p_cookies
$0005A4|long |Pointer to end of FastRam |ramtop
$0005A8|long |Validates ramtop if $1357BD13 |ramvalid
$0005AC|long |Pointer to routine for system bell |bell_hook
$0005B0|long |Pointer to routine for system keyclick |kcl_hook
-------+-----+-----------------------------------------------------+----------
Address Size Description Bits used Read/Write
-------+-----+-----------------------------------------------------+----------
##############OS ROMs ###########
-------+-----+-----------------------------------------------------+----------
$E00000|byte |TOS 512k ROMs |R
: | : | : : : |:
$EFFFFF|byte |TOS 512k ROMs |R
-------+-----+-----------------------------------------------------+----------
##############ADSPEED Configuration registers ###########
-------+-----+-----------------------------------------------------+----------
$F00000|byte |Switch to 16 Mhz |W
$F10000|byte |Switch to 8 Mhz |W
$F20000|byte |Turn on high speed ROM option in 16 Mhz |W
$F30000|byte |Turn off high speed ROM option |W
$F40000|byte |Unknown |W
$F50000|byte |Turn off cache while in 16 Mhz |W
| | >> Write 0 to an address to set it. << |
-------+-----+-----------------------------------------------------+----------
##############IDE Controller (Falcon, ST-Book, IDE cards) ###########
-------+-----+-----------------------------------------------------+----------
$F00000|long |Data Register |R/W
$F00005|byte |Error Register BIT 7 6 5 4 3 2 1 0|R
| |Bad block mark -----------------------' | | | | | | ||
| |Uncorrectable error --------------------' | | | | | ||
| |Media change -----------------------------' | | | | ||
| |ID-Field not found -------------------------' | | | ||
| |Media change requested -----------------------' | | ||
| |Command aborted --------------------------------' | ||
| |Track 0 not found --------------------------------' ||
| |DAM not found --------------------------------------'|
$F00009|byte |Sector Count Register |W
$F0000D|byte |Sector Number Register |W
$F00011|byte |Cylinder Low Register |W
$F00015|byte |Cylinder High Register |W
$F00019|byte |Drive Head Register |W
$F0001D|byte |Status Register |R
$F0001D|byte |Command Register |W
$F00039|byte |Alternate Status Register |R
$F00039|byte |Data Output Register |W
-------+-----+-----------------------------------------------------+----------
##############ST MMU Controller ###########
-------+-----+-----------------------------------------------------+----------
$FF8001|byte |MMU memory configuration BIT 3 2 1 0|R/W
| |Bank 0 | | | ||
| |00 - 128k ------------------------------------+-+ | ||
| |01 - 512k ------------------------------------+-+ | ||
| |10 - 2m --------------------------------------+-+ | ||
| |11 - reserved --------------------------------+-' | ||
| |Bank 1 | ||
| |00 - 128k ----------------------------------------+-+|
| |01 - 512k ----------------------------------------+-+|
| |10 - 2m ------------------------------------------+-+|
| |11 - reserved ------------------------------------+-'|
-------+-----+-----------------------------------------------------+----------
##############Falcon030 Processor Control ###########
-------+-----+-----------------------------------------------------+----------
$FF8007|byte |Falcon Bus Control BIT 5 . . 2 . 0|R/W (F030)
| |STe Bus Emulation (0 - on) ---------------' | ||
| |Blitter (0 - 8mhz, 1 - 16mhz) ------------------' ||
| |68030 (0 - 8mhz, 1 - 16mhz) ------------------------'|
-------+-----+-----------------------------------------------------+----------
##############SHIFTER Video Controller ###########
-------+-----+-----------------------------------------------------+----------
$FF8201|byte |Video screen memory position (High byte) |R/W
$FF8203|byte |Video screen memory position (Mid byte) |R/W
$FF820D|byte |Video screen memory position (Low byte) |R/W (STe)
$FF8205|byte |Video address pointer (High byte) |R
$FF8207|byte |Video address pointer (Mid byte) |R
$FF8209|byte |Video address pointer (Low byte) |R
$FF820E|word |Offset to next line |R/W (F030)
$FF820F|byte |Width of a scanline (width in words-1) |R/W (STe)
$FF8210|word |Width of a scanline (width in words) |R/W (F030)
$FF8265|byte |Horizontal scroll register (0-15) |R/W (STe)
-------+-----+-----------------------------------------------------+----------
$FF820A|byte |Video synchronization mode BIT 1 0|R/W
| |0 - 60hz, 1 - 50hz -------------------------------+ ||
| |0 - internal, 1 - external sync ------------------' || (TT)
| |0 - internal, 1 - external sync --------------------'| (!TT)
-------+-----+-----------------------------------------------------+----------
| | BIT 11111198 76543210|
| | 543210 |
| | ST color value .....RRr .GGr.BBb|
| | STe color value ....rRRR gGGGbBBB|
$FF8240|word |Video palette register 0 Lowercase = LSB|R/W
: | : | : : : : | :
$FF825E|word |Video palette register 15 |R/W
-------+-----+-----------------------------------------------------+----------
$FF8260|byte |Shifter resolution BIT 1 0|R/W
| |00 320x200x4 bitplanes (16 colors) ---------------+-+|
| |01 640x200x2 bitplanes (4 colors) ----------------+-+|
| |10 640x400x1 bitplane (1 colors) ----------------+-'|
$FF8262|word |TT Shifter resolution BIT 15 . . 12|R/W (TT)
| |Sample/Hold mode ----------------------------' ||
| |Hypermono mode -------------------------------------'|
| |Video Mode BIT 10 9 8|
| |000 320x200x4 bitplanes (16 colors) -----------+-+-+|
| |001 640x200x2 bitplanes (4 colors) ------------+-+-+|
| |010 640x400x1 bitplane (2 colors)(Duochrome) -+-+-+|
| |100 640x480x4 bitplanes (16 colors) -----------+-+-+|
| |110 1280x960x1 bitplane (2 colors) ------------+-+-+|
| |111 320x480x8 bitplanes (256 colors) ----------+-+-'|
| |ST Palette Bank BIT 3 2 1 0|
-------+-----+-----------------------------------------------------+----------
$FF827E|???? |STACY Display Driver |???(STACY)
-------+-----+-----------------------------------------------------+----------
| | BIT 11111198 76543210|
| | 543210 |
| | TT color value ....RRRr GGGgBBBb|
$FF8400|word |TT Palette 0 Lowercase = LSB|R/W (TT)
: | : | : : : | : :
$FF85FE|word |TT Palette 255 |R/W (TT)
-------+-----+-----------------------------------------------------+----------
##############Falcon030 VIDEL Video Controller ###########
-------+-----+-----------------------------------------------------+----------
$FF8006|byte |Monitor Type BIT 1 0|R (F030)
| |00 - Monochrome (SM124) --------------------------+-+|
| |01 - Color (SC1224) ------------------------------+-+|
| |10 - VGA Color -----------------------------------+-+|
| |11 - Television ----------------------------------+-'|
$FF820E|word |Offset to next line |R/W (F030)
$FF8210|word |VWRAP - Linewidth in words |R/W (F030)
$FF8266|word |SPSHIFT BIT 10 . 8 . 6 5 4 3 2 1 0|R/W (F030)
| |2-colour mode ------------------' | | | | | | | ||
| |Truecolour mode --------------------' | | | | | | ||
| |Use external hsync ---------------------' | | | | | ||
| |Use external vsync -----------------------' | | | | ||
| |8 Bitplane mode ----------------------------' | | | ||
| |? Bitplane mode ------------------------------' | | ||
| |? Bitplane mode --------------------------------' | ||
| |? Bitplane mode ----------------------------------' ||
| |? Bitplane mode ------------------------------------'|
| +-----------------------------------------------------+
| | Horizontal Control Registers (9bit)|
$FF8280|word |HHC - Horizontal Hold Counter |R (F030)
$FF8282|word |HHT - Horizontal Hold Timer |R/W (F030)
$FF8284|word |HBB - Horizontal Border Begin |R/W (F030)
$FF8286|word |HBE - Horizontal Border End |R/W (F030)
$FF8288|word |HDB - Horizontal Display Begin |R/W (F030)
$FF828A|word |HDE - Horizontal Display End |R/W (F030)
$FF828C|word |HSS - Horizontal SS |R/W (F030)
$FF828E|word |HFS - Horizontal FS |R/W (F030)
$FF8290|word |HEE - Horizontal EE |R/W (F030)
| +-----------------------------------------------------+
| | Vertical Control Registers (10bit)|
$FF82A0|word |VFC - Vertcial Frequency Counter |R (F030)
$FF82A2|word |VFT - Vertical Frequency Timer |R/W (F030)
$FF82A4|word |VBB - Vertical Border Begin (count in 1/2 lines)|R/W (F030)
$FF82A6|word |VBE - Vertical Border End (count in 1/2 lines)|R/W (F030)
$FF82A8|word |VDB - Vertical Display Begin |R/W (F030)
$FF82AA|word |VDE - Vertical Display End |R/W (F030)
$FF82AC|word |VSS - Vertical SS |R/W (F030)
| +-----------------------------------------------------+
$FF82C0|word |??? - Video Clock (?) (Super78 puts $182 here) |R/W (F030)
$FF82C2|word |VCO - Video Control BIT 3 2 1 0|R/W (F030)
| |Quarter pixel width (quadruple pixels) -------' | | ||
| |Half pixel width (double pixels) ---------------' | ||
| |Skip line (interlace) ----------------------------' ||
| |Line doubling --------------------------------------'|
-------+-----+-----------------------------------------------------+----------
##############DMA/WD1772 Disk controller ###########
-------+-----+-----------------------------------------------------+----------
$FF8600| |Reserved |
$FF8602| |Reserved |
$FF8604|word |FDC access/sector count |R/W
$FF8606|word |DMA mode/status BIT 2 1 0|R
| |Condition of FDC DATA REQUEST signal -----------' | ||
| |0 - sector count null,1 - not null ---------------' ||
| |0 - no error, 1 - DMA error ------------------------'|
$FF8606|word |DMA mode/status BIT 8 7 6 . 4 3 2 1 .|W
| |0 - read FDC/HDC,1 - write ---------' | | | | | | | |
| |0 - HDC access,1 - FDC access --------' | | | | | | |
| |0 - DMA on,1 - no DMA ------------------' | | | | | |
| |Reserved ---------------------------------' | | | | |
| |0 - FDC reg,1 - sector count reg -----------' | | | |
| |0 - FDC access,1 - HDC access ----------------' | | |
| |0 - pin A1 low, 1 - pin A1 high ----------------' | |
| |0 - pin A0 low, 1 - pin A0 high ------------------' |
$FF8609|byte |DMA base and counter (High byte) |R/W
$FF860B|byte |DMA base and counter (Mid byte) |R/W
$FF860D|byte |DMA base and counter (Low byte) |R/W
-------+-----+-----------------------------------------------------+----------
##############TT-SCSI DMA Controller ###########
-------+-----+-----------------------------------------------------+----------
$FF8701|byte |DMA Address Pointer (Highest byte) |R/W (TT)
$FF8703|byte |DMA Address Pointer (High byte) |R/W (TT)
$FF8705|byte |DMA Address Pointer (Low byte) |R/W (TT)
$FF8707|byte |DMA Address Pointer (Lowest byte) |R/W (TT)
$FF8709|byte |DMA Byte Count (Highest byte) |R/W (TT)
$FF870B|byte |DMA Byte Count (High byte) |R/W (TT)
$FF870D|byte |DMA Byte Count (Low byte) |R/W (TT)
$FF870F|byte |DMA Byte Count (Lowest byte) |R/W (TT)
$FF8710|word |Residue Data Register (High Word) |R (TT)
$FF8712|word |Residue Data Register (Low Word) |R (TT)
$FF8715|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT)
| |Bus error ----------------------------' | | ||
| |Byte count zero ------------------------' | ||
| |Enable -------------------------------------------' ||
| |DMA Direction (1 - out to port) --------------------'|
-------+-----+-----------------------------------------------------+----------
##############TT-SCSI Drive Controller NCR 5380 ###########
-------+-----+-----------------------------------------------------+----------
$FF8781|byte |Data register |R/W (TT)
$FF8783|byte |Init-Command Register |R/W (TT)
$FF8785|byte |Mode Register |R/W (TT)
$FF8787|byte |Target-Command Register |R/W (TT)
$FF8789|byte |ID Select/SCSI Control Register |R/W (TT)
$FF878B|byte |Status Register |R/W (TT)
$FF878D|byte |Target Receive/Input Data |R/W (TT)
$FF878F|byte |Initiate Receive/Reset |R/W (TT)
-------+-----+-----------------------------------------------------+----------
##############YM2149 Sound Chip ###########
-------+-----+-----------------------------------------------------+----------
$FF8800|byte |Read data/Register select |R/W
| |0 Channel A Freq Low BIT 7 6 5 4 3 2 1 0|
| |1 Channel A Freq High BIT 3 2 1 0|
| |2 Channel B Freq Low BIT 7 6 5 4 3 2 1 0|
| |3 Channel B Freq High BIT 3 2 1 0|
| |4 Channel C Freq Low BIT 7 6 5 4 3 2 1 0|
| |5 Channel C Freq High BIT 3 2 1 0|
| |6 Noise Freq BIT 5 4 3 2 1 0|
| |7 Mixer Control BIT 7 6 5 4 3 2 1 0|
| | Port B IN/OUT (1=Output) -----------' | | | | | | ||
| | Port A IN/OUT ------------------------' | | | | | ||
| | Channel C Noise (1=Off) ----------------' | | | | ||
| | Channel B Noise --------------------------' | | | ||
| | Channel A Noise ----------------------------' | | ||
| | Channel C Tone (0=On) ------------------------' | ||
| | Channel B Tone ---------------------------------' ||
| | Channel A Tone -----------------------------------'|
| |8 Channel A Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level (0=Fixed) -----------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |9 Channel B Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |10 Channel C Amplitude Control BIT 4 3 2 1 0|
| | Fixed/Variable Level ---------------------' | | | ||
| | Amplitude level control --------------------+-+-+-'|
| |11 Envelope Period High BIT 7 6 5 4 3 2 1 0|
| |12 Envelope Period Low BIT 7 6 5 4 3 2 1 0|
| |13 Envelope Shape BIT 3 2 1 0|
| | Continue -----------------------------------' | | ||
| | Attack ---------------------------------------' | ||
| | Alternate --------------------------------------' ||
| | Hold ---------------------------------------------'|
| | 00xx - \____________________________________ |
| | 01xx - /|___________________________________ |
| | 1000 - \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\ |
| | 1001 - \____________________________________ |
| | 1010 - \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ |
| | 1011 - \|----------------------------------- |
| | 1100 - /|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/ |
| | 1101 - /------------------------------------ |
| | 1110 - /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ |
| | 1111 - /|___________________________________ |
| |14 Port A BIT 7 6 5 4 3 2 1 0|
| | IDE Drive On/OFF -------------------+ | | | | | | || (F030)
| | SCC A (0=LAN, 1=Serial2) -----------' | | | | | | || (TT)
| | Monitor jack GPO pin -----------------+ | | | | | ||
| | Internal Speaker On/Off --------------' | | | | | || (F030)
| | Centronics strobe ----------------------' | | | | ||
| | RS-232 DTR output ------------------------' | | | ||
| | RS-232 RTS output --------------------------' | | ||
| | Drive select 1 -------------------------------' | ||
| | Drive select 0 ---------------------------------' ||
| | Drive side select --------------------------------'|
| |15 Port B (Parallel port) |
$FF8802|byte |Write data |W
| +-----------------------------------------------------+
| |Note: PSG Registers are now fixed at these addresses.|
| |All other addresses are masked out on the Falcon. Any|
| |writes to the shadow registers $8804-$88FF will cause|
| |bus errors. Game/Demo coders beware! |
-------+-----+-----------------------------------------------------+----------
##############DMA Sound System ###########
-------+-----+-----------------------------------------------------+----------
$FF8900|byte |Buffer interrupts BIT 3 2 1 0|R/W (F030)
| |TimerA-Int at end of record buffer -----------' | | ||
| |TimerA-Int at end of replay buffer -------------' | ||
| |MFP-15-Int (I7) at end of record buffer ----------' ||
| |MFP-15-Int (I7) at end of replay buffer ------------'|
-------+-----+-----------------------------------------------------+----------
$FF8901|byte |DMA Control Register BIT 7 . 5 4 . . 1 0|R/W
| |1 - select record register -----------+ | | | || (F030)
| |0 - select replay register -----------' | | | || (F030)
| |Loop record buffer -----------------------' | | || (F030)
| |DMA Record on ------------------------------' | || (F030)
| |Loop replay buffer -------------------------------' || (STe)
| |DMA Replay on --------------------------------------'| (STe)
-------+-----+-----------------------------------------------------+----------
$FF8903|byte |Frame start address (high byte) |R/W (STe)
$FF8905|byte |Frame start address (mid byte) |R/W (STe)
$FF8907|byte |Frame start address (low byte) |R/W (STe)
$FF8909|byte |Frame address counter (high byte) |R (STe)
$FF890B|byte |Frame address counter (mid byte) |R (STe)
$FF890D|byte |Frame address counter (low byte) |R (STe)
$FF890F|byte |Frame end address (high byte) |R/W (STe)
$FF8911|byte |Frame end address (mid byte) |R/W (STe)
$FF8913|byte |Frame end address (low byte) |R/W (STe)
-------+-----+-----------------------------------------------------+----------
$FF8920|byte |DMA Track Control BIT 5 4 . . 1 0|R/W (F030)
| |00 - Set DAC to Track 0 ------------------+-+ | ||
| |01 - Set DAC to Track 1 ------------------+-+ | ||
| |10 - Set DAC to Track 2 ------------------+-+ | ||
| |11 - Set DAC to Track 3 ------------------+-' | ||
| |00 - Play 1 Track --------------------------------+-+|
| |01 - Play 2 Tracks -------------------------------+-+|
| |10 - Play 3 Tracks -------------------------------+-+|
| |11 - Play 4 Tracks -------------------------------+-'|
-------+-----+-----------------------------------------------------+----------
$FF8921|byte |Sound mode control BIT 7 6 . . . . 1 0|R/W (STe)
| |0 - Stereo, 1 - Mono -----------------' | | ||
| |0 - 8bit -------------------------------+ | ||
| |1 - 16bit (F030 only) ------------------' | || (F030)
| |Frequency control bits | ||
| |00 - Off (F030 only) -----------------------------+-+| (F030)
| |00 - 6258hz frequency (STe only) -----------------+-+|
| |01 - 12517hz frequency ---------------------------+-+|
| |10 - 25033hz frequency ---------------------------+-+|
| |11 - 50066hz frequency ---------------------------+-'|
| |Samples are always signed. In stereo mode, data is |
| |arranged in pairs with high pair the left channel,low|
| |pair right channel. Sample length MUST be even in |
| |either mono or stereo mode. |
| |Example: 8 bit Stereo : LRLRLRLRLRLRLRLR |
| | 16 bit Stereo : LLRRLLRRLLRRLLRR (F030) |
| |2 track 16 bit stereo : LLRRllrrLLRRllrr (F030) |
-------+-----+-----------------------------------------------------+----------
##############STe Microwire Controller (STe/TT only!) ###########
-------+-----+-----------------------------------------------------+----------
$FF8922|byte |Microwire data register |R/W (Mwr)
$FF8924|byte |Microwire mask register |R/W (Mwr)
| +-----------------------------------------------------+
| |!! ATTENTION !! Microwire is now obsolete! It is not |
| |present in the Falcon030 and is unlikely to be in any|
| |future machines. You have been warned. |
| +-----------------------------------------------------+
| |Volume/tone controller commands (Address %10)|
| |Master Volume 10 011 DDDDDD|
| |Left Volume 10 101 .DDDDD|
| |Right Volume 10 100 .DDDDD|
| |Treble 10 010 ..DDDD|
| |Bass 10 001 ..DDDD|
| |Mixer 10 000 ....DD|
| +-----------------------------------------------------+
| |Volume/tone controller values |
| |Master Volume : 0-40 (0 -80dB, 40=0dB) |
| |Left/Right Volume : 0-20 (0 80dB, 20=0dB) |
| |Treble/bass : 0-12 (0 -12dB, 12 +12dB) |
| |Mixer : 0-3 (0 -12dB, 1 mix PSG) |
| | (2 don't mix,3 reserved) |
| +-----------------------------------------------------+
| |Procedure: Set mask register to $7ff. Read data |
| |register and save original value.Write data register.|
| |Compare data register with original value, repeat |
| |until data register returns to original value to |
| |ensure data has been sent over the interface. |
| +-----------------------------------------------------+
| |Interrupts: Timer A can be set to interrupt at the |
| |end of a frame. Alternatively, the GPI7 (MFP mono |
| |detect) can be used to generate interrupts thereby |
| |freeing up Timer A. In this case, the active edge |
| |$FFFA03 must be set by or-ing the active edge of |
| |$FFFA03 with the contents of $FF8260: |
| |$FF8260 - 2 (mono) or.b #$80 with edge |
| |$FF8260 - 0,1 (colour) and.b #$7F with edge |
| |This will generate an interrupt at the START of a |
| |frame, instead of at the end as with Timer A. To |
| |generate an interrupt at the END of a frame, simply |
| |reverse the edge values. |
-------+-----+-----------------------------------------------------+----------
##############Falcon030 DMA/DSP Controllers ###########
-------+-----+-----------------------------------------------------+----------
$FF8930|word |Crossbar Source Controller |R/W (F030)
| +-----------------------------------------------------+
| |Source: A/D Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - disconnect ---------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock (Don't use) -----------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: External Input BIT 11 10 9 8|
| |0 - DSP IN, 1 - All others ----------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DSP-XMIT BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Source: DMA-PLAYBACK BIT 3 2 1 0|
| |0 - Handshaking on, dest DSP-REC ----------+ | | ||
| |1 - Destination is not DSP-REC ------------' | | ||
| |00 - 25.175Mhz clock -------------------------+--+ ||
| |01 - External clock --------------------------+--+ ||
| |10 - 32Mhz clock -----------------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
-------+-----+-----------------------------------------------------+----------
$FF8932|word |Crossbar Destination Controller |R/W (F030)
| +-----------------------------------------------------+
| |Destination: D/A Convertor BIT 15 14 13 12|
| |1 - Connect, 0 - Disconnect ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: External Output BIT 11 10 9 8|
| |0 - DSP out, 1 - All others ---------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DSP-RECORD BIT 7 6 5 4|
| |0 - Tristate and disconnect DSP -----------+ | | ||
| | (Only for external SSI use) | | | ||
| |1 - Connect DSP to multiplexer ------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
| +-----------------------------------------------------+
| |Destination: DMA-RECORD BIT 3 2 1 0|
| |0 - Handshaking on, src DSP-XMIT ----------+ | | ||
| |1 - Source is not DSP-XMIT ----------------' | | ||
| |00 - Source DMA-PLAYBACK ---------------------+--+ ||
| |01 - Source DSP-XMIT -------------------------+--+ ||
| |10 - Source External Input -------------------+--+ ||
| |11 - Source A/D Convertor --------------------+--' ||
| |0 - Handshake on, 1 - Handshake off ----------------'|
-------+-----+-----------------------------------------------------+----------
$FF8934|byte |Frequency Divider External Clock BIT 3 2 1 0|R/W (F030)
| |0000 - STe-Compatible mode |
| |0001 - 1111 Divide by 256 and then number |
-------+-----+-----------------------------------------------------+----------
$FF8935|byte |Frequency Divider Internal Sync BIT 3 2 1 0|R/W (F030)
| |0000 - STe-Compatible mode 1000 - 10927Hz* |
| |0001 - 49170Hz 1001 - 9834Hz |
| |0010 - 32780Hz 1010 - 8940Hz* |
| |0011 - 24585Hz 1011 - 8195Hz |
| |0100 - 19668Hz 1100 - 7565Hz* |
| |0101 - 16390Hz 1101 - 7024Hz* |
| |0110 - 14049Hz* 1110 - 6556Hz* |
| |0111 - 12292Hz 1111 - 6146Hz* |
| | * - Invalid for CODEC |
-------+-----+-----------------------------------------------------+----------
$FF8936|byte |Record Tracks Select BIT 1 0|R/W (F030)
| |00 - Record 1 Track ------------------------------+-+|
| |01 - Record 2 Tracks -----------------------------+-+|
| |10 - Record 3 Tracks -----------------------------+-+|
| |11 - Record 4 Tracks -----------------------------+-'|
-------+-----+-----------------------------------------------------+----------
$FF8937|byte |CODEC Input Source from 16bit adder BIT 1 0|R/W (F030)
| |Source: Multiplexer ------------------------------' ||
| |Source: A/D Convertor ------------------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8938|byte |CODEC ADC-Input for L+R Channel BIT 1 0|R/W (F030)
| |0 - Microphone, 1 - Soundchip L R|
-------+-----+-----------------------------------------------------+----------
$FF8939|byte |Channel amplification BIT LLLL RRRR|R/W (F030)
| | Amplification is in +1.5dB steps |
-------+-----+-----------------------------------------------------+----------
$FF893A|word |Channel attenuation BIT LLLL RRRR|R/W (F030)
| | Attenuation is in -1.5dB steps |
-------+-----+-----------------------------------------------------+----------
$FF893C|byte |CODEC-Status BIT 1 0|R/W (F030)
| |Left Channel Overflow ----------------------------' ||
| |Right Channel Overflow -----------------------------'|
-------+-----+-----------------------------------------------------+----------
$FF8941|byte |GPx Data Direction BIT 2 1 0|R/W (F030)
| |0 - In, 1 - Out --------------------------------+-+-'|
| | For the GP0-GP2 pins on the DSP connector |
-------+-----+-----------------------------------------------------+----------
$FF8943|byte |GPx Data Port BIT 2 1 0|R/W (F030)
-------+-----+-----------------------------------------------------+----------
##############TT Clock Chip (MC146818A @ 32.768 khz) ###########
-------+-----+-----------------------------------------------------+----------
$FF8961|byte |Register select |W (TT)
| |0 - Current Second |
| |1 - Second for alarm |
| |2 - Current Minute |
| |3 - Minute for alarm |
| |4 - Current Hour |
| |5 - Hour for alarm |
| |6 - Day of week (1=Sunday, 2=Monday, 3=...) |
| |7 - Day of Month |
| |8 - Month |
| |9 - Year (example : '93' for this year) |
| |A BIT 7|
| | If set, update time in progress ----------------'|
| | don't read time & date registers |
| |B BIT 7 6 5 4 3 2 1 0|
| |1 = Write Protect time & date --------' | | | | ||
| |1 = Enable alarm interrupt ---------------' | | | ||
| |1 = Interrupt after time updated -----------' | | ||
| |1 = Format Binary, 0 = Format BCD --------------' | ||
| |1 = 24hr format, 0 = 12hr format -----------------' ||
| |1 = Summer hours, 0 = Winter hours -----------------'|
| |C BIT 6 5 4|
| | ??? -------------------------------------------' | ||
| |1 = alarm is ringing -----------------------------' ||
| |1 = date is updated --------------------------------'|
| |On interrupt, read this register to determine source.|
| |D BIT 7|
| |1 = Battery dead -----------------------------------'|
$FF8963|byte |Register data |R/W (TT)
-------+-----+-----------------------------------------------------+----------
##############Blitter (Not present on TT!) ###########
-------+-----+-----------------------------------------------------+----------
$FF8A00|word |Halftone-RAM, Word 0 |R/W (Blit)
: | : | : : : : | : :
$FF8A1E|word |Halftone-RAM, Word 15 |R/W (Blit)
$FF8A20|word |Source X Increment (signed,even)|R/W (Blit)
$FF8A22|word |Source Y Increment (signed,even)|R/W (Blit)
$FF8A24|long |Source Address Register (24 bit,even)|R/W (Blit)
$FF8A28|word |Endmask 1 (First write of a line)|R/W (Blit)
$FF8A2A|word |Endmask 2 (All other line writes)|R/W (Blit)
$FF8A2C|word |Endmask 3 (Last write of a line)|R/W (Blit)
$FF8A2E|word |Destination X Increment (signed,even)|R/W (Blit)
$FF8A30|word |Destination Y Increment (signed,even)|R/W (Blit)
$FF8A32|long |Destination Address Register (24 bit,even)|R/W (Blit)
$FF8A36|word |Words per Line in Bit-Block (0=65536)|R/W (Blit)
$FF8A38|word |Lines per Bit-Block (0=65536)|R/W (Blit)
$FF8A3A|byte |Halftone Operation Register BIT 1 0|R/W (Blit)
| |00 - All ones ------------------------------------+-+|
| |01 - Halftone ------------------------------------+-+|
| |10 - Source --------------------------------------+-+|
| |11 - Source AND Halftone -------------------------+-'|
$FF8A3B|byte |Logical Operation Register BIT 3 2 1 0|R/W (Blit)
| |0000 All zeros -------------------------------+-+-+-+|
| |0001 Source AND destination ------------------+-+-+-+|
| |0010 Source AND NOT destination --------------+-+-+-+|
| |0011 Source ----------------------------------+-+-+-+|
| |0100 NOT source AND destination --------------+-+-+-+|
| |0101 Destination -----------------------------+-+-+-+|
| |0110 Source XOR destination ------------------+-+-+-+|
| |0111 Source OR destination -------------------+-+-+-+|
| |1000 NOT source AND NOT destination ----------+-+-+-+|
| |1001 NOT source XOR destination --------------+-+-+-+|
| |1010 NOT destination -------------------------+-+-+-+|
| |1011 Source OR NOT destination ---------------+-+-+-+|
| |1100 NOT source ------------------------------+-+-+-+|
| |1101 NOT source OR destination ---------------+-+-+-+|
| |1110 NOT source OR NOT destination -----------+-+-+-+|
| |1111 All ones --------------------------------+-+-+-'|
$FF8A3C|byte |Line Number Register BIT 7 6 5 . 3 2 1 0|R/W (Blit)
| |BUSY ---------------------------------' | | | | | ||
| |0 - Share bus, 1 - Hog bus -------------' | | | | ||
| |SMUDGE mode ------------------------------' | | | ||
| |Halftone line number -------------------------+-+-+-'|
$FF8A3D|byte |SKEW Register BIT 7 6 . . 3 2 1 0|R/W (Blit)
| |Force eXtra Source Read --------------' | | | | ||
| |No Final Source Read -------------------' | | | ||
| |Source skew ----------------------------------+-+-+-'|
-------+-----+-----------------------------------------------------+----------
##############SCC-DMA (TT Only!) ###########
-------+-----+-----------------------------------------------------+----------
$FF8C01|byte |DMA Address Pointer (Highest Byte) |R/W (TT)
$FF8C03|byte |DMA Address Pointer (High Byte) |R/W (TT)
$FF8C05|byte |DMA Address Pointer (Low Byte) |R/W (TT)
$FF8C07|byte |DMA Address Pointer (Lowest Byte) |R/W (TT)
$FF8C09|byte |DMA Byte Count (Highest-Byte) |R/W (TT)
$FF8C0B|byte |DMA Byte Count (High-Byte) |R/W (TT)
$FF8C0D|byte |DMA Byte Count (Low-Byte) |R/W (TT)
$FF8C0F|byte |DMA Byte Count (Lowest-Byte) |R/W (TT)
$FF8C10|word |Residue Data Register (High-Word) |R (TT)
$FF8C12|word |Residue Data register (Low-Word) |R (TT)
$FF8C15|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT)
| |Bus error ----------------------------' | | ||
| |Byte count zero ------------------------' | ||
| |Enable -------------------------------------------' ||
| |DMA Direction (1 - out to port) --------------------'|
-------+-----+-----------------------------------------------------+----------
##############Zilog 8530 SCC (MSTe/TT/F030) ###########
-------+-----+-----------------------------------------------------+----------
$FF8C81|byte |Channel A - Control Register |R/W (SCC)
$FF8C83|byte |Channel A - Data Register |R/W (SCC)
$FF8C85|byte |Channel B - Control Register |R/W (SCC)
$FF8C87|byte |Channel B - Data Register |R/W (SCC)
-------+-----+-----------------------------------------------------+----------
##############VME Bus System Control Unit (MSTe/TT) ###########
-------+-----+-----------------------------------------------------+----------
$FF8E01|byte |VME sys_mask BIT 7 6 5 4 . 2 1 .|R/W (VME)
$FF8E03|byte |VME sys_stat BIT 7 6 5 4 . 2 1 .|R (VME)
| |_SYSFAIL in VMEBUS -------------------' | | | | | |program
| |MFP ------------------------------------' | | | | |autovec
| |SCC --------------------------------------' | | | |autovec
| |VSYNC --------------------------------------' | | |program
| |HSYNC ------------------------------------------' | |program
| |System software INT ------------------------------' |program
| +-----------------------------------------------------+
| |Reading sys_mask resets pending int-bits in sys_stat,|
| |so read sys_stat first. |
-------+-----+-----------------------------------------------------+----------
$FF8E05|byte |VME sys_int BIT 0|R/W (VME)
| |Setting bit 0 to 1 forces an INT of level 1. INT must|Vector $64
| |be enabled in sys_mask to use it. |
-------+-----+-----------------------------------------------------+----------
$FF8E0D|byte |VME vme_mask BIT 7 6 5 4 3 2 1 .|R/W (VME)
$FF8E0F|byte |VME vme_stat BIT 7 6 5 4 3 2 1 .|R (VME)
| |_IRQ7 from VMEBUS --------------------' | | | | | | |program
| |_IRQ6 from VMEBUS/MFP ------------------' | | | | | |program
| |_IRQ5 from VMEBUS/SCC --------------------' | | | | |program
| |_IRQ4 from VMEBUS --------------------------' | | | |program
| |_IRQ3 from VMEBUS/soft -----------------------' | | |prog/autov
| |_IRQ2 from VMEBUS ------------------------------' | |program
| |_IRQ1 from VMEBUS --------------------------------' |program
| +-----------------------------------------------------+
| |MFP-int and SCC-int are hardwired to the VME-BUS-ints|
| |(or'ed). Reading vme_mask resets pending int-bits in |
| |vme_stat, so read vme_stat first. |
-------+-----+-----------------------------------------------------+----------
$FF8E07|byte |VME vme_int BIT 0|R/W (TT)
| |Setting bit 0 to 1 forces an INT of level 3. INT must|Vector $6C
| |be enabled in vme_mask to use it. |
-------+-----+-----------------------------------------------------+----------
$FF8E09|byte |General purpose register - does nothing |R/W (TT)
$FF8E0B|byte |General purpose register - does nothing |R/W (TT)
-------+-----+-----------------------------------------------------+----------
##############Mega STe Cache/Processor Control ###########
-------+-----+-----------------------------------------------------+----------
$FF8E21|byte |Mega STe Cache/Processor Control BIT 15-1 0|R/W (MSTe)
| |Cache enable lines (set all to 1 to enable) -----' ||
| |CPU Speed (0 - 8mhz, 1 - 16mhz) --------------------'|
-------+-----+-----------------------------------------------------+----------
##############STe/F030 Extended Joystick/Lightpen Ports ###########
-------+-----+-----------------------------------------------------+----------
$FF9200|word |Fire buttons 1-4 Bit 3 2 1 0|R (Ext)
| |Pause/F0 -------------------------------------' | | ||
| |F1 ---------------------------------------------' | ||
| |F2 -----------------------------------------------' ||
| |Option/F3 ------------------------------------------'|
$FF9202|word |Read Mask (0 - pin read) |W (Ext)
$FF9202|word |Joystick Inputs BIT 7 6 5 4 3 2 1 0|R (Ext)
| |Controller 1 pin 4 -------------------' | | | | | | ||
| |Controller 1 pin 3 ---------------------' | | | | | ||
| |Controller 1 pin 2 -----------------------' | | | | ||
| |Controller 1 pin 1 -------------------------' | | | ||
| |Controller 0 pin 4 ---------------------------' | | ||
| |Controller 0 pin 3/Paddle 1 Trigger ------------' | ||
| |Controller 0 pin 2/Paddle 0 Trigger --------------' ||
| |Controller 0 pin 1 ---------------------------------'|
| | BIT 15 14 13 12 11 10 9 8|
| |Controller 1 pin 14 ------------' | | | | | | ||
| |Controller 1 pin 13 ----------------' | | | | | ||
| |Controller 1 pin 12 -------------------' | | | | ||
| |Controller 1 pin 11 ----------------------' | | | ||
| |Controller 0 pin 14 -------------------------' | | ||
| |Controller 0 pin 13 ----------------------------' | ||
| |Controller 0 pin 12 ------------------------------' ||
| |Controller 0 pin 11 --------------------------------'|
$FF9210|word |X Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext)
$FF9212|word |Y Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext)
$FF9214|word |X Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext)
$FF9216|word |Y Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext)
$FF9220|word |Lightpen X-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext)
$FF9222|word |Lightpen Y-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext)
-------+-----+-----------------------------------------------------+----------
##############Falcon VIDEL Palette Registers ###########
-------+-----+-----------------------------------------------------+----------
| | BIT 33222222 22221111 11111198 76543210|
| | 10987654 32109876 543210 |
| | RRRRRr.. GGGGGg.. ........ BBBBBb..|
$FF9800|long |Palette Register 0 Lowercase = LSB|R/W (F030)
: | : | : : : | : :
$FF98FC|long |Palette Register 255 |R/W (F030)
-------+-----+-----------------------------------------------------+----------
##############Falcon DSP Host Interface ###########
-------+-----+-----------------------------------------------------+----------
$FFA200|byte |Interrupt Ctrl Register BIT 7 6 5 4 3 . 1 0|R/W (F030)
X:$FFE9| |INIT bit -----------------------------' | | | | | ||
| |00 - Interupt mode (DMA off) -----------+-+ | | | ||
| |01 - 24-bit DMA mode -------------------+-+ | | | ||
| |10 - 16-bit DMA mode -------------------+-+ | | | ||
| |11 - 8-bit DMA mode --------------------+-' | | | ||
| |Host Flag 1 --------------------------------' | | ||
| |Host Flag 0 ----------------------------------' | ||
| | Host mode Data transfers: | ||
| | Interrupt mode | ||
| |00 - No interrupts (Polling) ---------------------+-+|
| |01 - RXDF Request (Interrupt) --------------------+-+|
| |10 - TXDE Request (Interrupt) --------------------+-+|
| |11 - RXDF and TXDE Request (Interrupts) ----------+-+|
| | DMA Mode | ||
| |00 - No DMA --------------------------------------+-+|
| |01 - DSP to Host Request (RX) --------------------+-+|
| |10 - Host to DSP Request (TX) --------------------+-+|
| |11 - Undefined (Illegal) -------------------------+-'|
$FFA201|byte |Command Vector Register BIT 7 . . 4 3 2 1 0|R/W (F030)
X:$FFE9| |Host Command Bit (Handshake)----------' | | | | ||
| |Host Vector (0-31) -------------------------+-+-+-+-'|
$FFA202|byte |Interrupt Status Reg BIT 7 6 . 4 3 2 1 0|R (F030)
X:$FFE8| |ISR Host Request ---------------------' | | | | | ||
| |ISR DMA Status -------------------------' | | | | ||
| |Host Flag 3 --------------------------------' | | | ||
| |Host Flag 2 ----------------------------------' | | ||
| |ISR Transmitter Ready (TRDY) -------------------' | ||
| |ISR Transmit Data Register Empty (TXDE) ----------' ||
| |ISR Receive Data Register Full (RXDF) --------------'|
$FFA203|byte |Interrupt Vector Register |R/W (F030)
$FFA204|byte |Unused | (F030)
$FFA205|byte |DSP-Word High |R/W (F030)
X:$FFEB| | |
$FFA206|byte |DSP-Word Mid |R/W (F030)
X:$FFEB| | |
$FFA207|byte |DSP-Word Low |R/W (F030)
X:$FFEB| | |
-------+-----+-----------------------------------------------------+----------
##############MFP 68901 - Multi Function Peripheral Chip ###########
-------+-----+-----------------------------------------------------+----------
| | MFP Master Clock is 2,457,600 cycles/second |
-------+-----+-----------------------------------------------------+----------
$FFFA01|byte |Parallel Port Data Register |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA03|byte |Active Edge Register BIT 7 6 5 4 . 2 1 0|R/W
| |Monochrome monitor detect ------------' | | | | | | ||
| |RS-232 Ring indicator ------------------' | | | | | ||
| |FDC/HDC interrupt ------------------------' | | | | ||
| |Keyboard/MIDI interrupt --------------------' | | | ||
| |Reserved -------------------------------------' | | ||
| |RS-232 CTS (input) -----------------------------' | ||
| |RS-232 DCD (input) -------------------------------' ||
| |Centronics busy ------------------------------------'|
| +-----------------------------------------------------+
| | When port bits are used for input only: |
| |0 - Interrupt on pin high-low conversion |
| |1 - Interrupt on pin low-high conversion |
-------+-----+-----------------------------------------------------+----------
$FFFA05|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W
| |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'|
-------+-----+-----------------------------------------------------+----------
$FFFA07|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W
$FFFA13|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$13C GPI7-Monochrome Detect ----------' | | | | | | ||
| |$138 RS-232 Ring Detector ------------' | | | | | ||
| |$134 (STe sound) Timer A --------------' | | | | ||
| |$130 Receive buffer full ----------------' | | | ||
| |$12C Receive error ------------------' | | ||
| |$128 Send buffer empty --------------------' | ||
| |$124 Send error ----------------------' ||
| |$120 (HBL) Timer B ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA09|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA0D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA11|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W
$FFFA15|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W
| |MFP Address | | | | | | | ||
| |$11C FDC/HDC ----------' | | | | | | ||
| |$118 Keyboard/MIDI ------------' | | | | | ||
| |$114 (200hz clock) Timer C --------------' | | | | ||
| |$110 (USART timer) Timer D ----------------' | | | ||
| |$10C Blitter done ------------------' | | ||
| |$108 RS-232 CTS - input --------------------' | ||
| |$104 RS-232 DCD - input ----------------------' ||
| |$100 Centronics Busy ------------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA17|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W
| |Vector Base Offset -------------------+-+-+-' | |
| |1 - *Software End-interrupt mode -------------+ |
| |0 - Automatic End-interrupt mode -------------' |
| |* - Default operating mode |
-------+-----+-----------------------------------------------------+----------
$FFFA19|byte |Timer A Control BIT 4 3 2 1 0|R/W
$FFFA1B|byte |Timer B Control BIT 4 3 2 1 0|R/W
| |Reset (force output low) -------------------' | | | ||
| +----------------------------------------------+-+-+-++
| |0000 - Timer stop, no function executed |
| |0001 - Delay mode, divide by 4 |
| |0010 - : : 10 |
| |0011 - : : 16 |
| |0100 - : : 50 |
| |0101 - : : 64 |
| |0110 - : : 100 |
| |0111 - Delay mode, divide by 200 |
| |1000 - Event count mode |
| |1xxx - Pulse extension mode, divide as above |
| +-----------------------------------------------------+
$FFFA1F|byte |Timer A Data |R/W
$FFFA21|byte |Timer B Data |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA1D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W
| | Timer Timer|
| | C D |
| +-----------------------------------------------------+
| |000 - Timer stop |
| |001 - Delay mode, divide by 4 |
| |010 - : : 10 |
| |011 - : : 16 |
| |100 - : : 50 |
| |101 - : : 64 |
| |110 - : : 100 |
| |111 - Delay mode, divide by 200 |
| +-----------------------------------------------------+
$FFFA23|byte |Timer C Data |R/W
$FFFA25|byte |Timer D Data |R/W
-------+-----+-----------------------------------------------------+----------
$FFFA27|byte |Sync Character |R/W
$FFFA29|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W
| |Clock divide (1 - div by 16) ---------' | | | | | | ||
| |Word Length 00 - 8 bits ----------------+-+ | | | | ||
| | 01 - 7 bits ----------------+-+ | | | | ||
| | 10 - 6 bits ----------------+-+ | | | | ||
| | 11 - 5 bits ----------------+-' | | | | ||
| |Bits Stop Start Format | | | | ||
| |00 0 0 Synchronous ----------------+-+ | | ||
| |01 1 1 Asynchronous ---------------+-+ | | ||
| |10 1 1.5 Asynchronous ---------------+-+ | | ||
| |11 1 2 Asynchronous ---------------+-' | | ||
| |Parity (0 - ignore parity bit) -----------------' | ||
| |Parity (0 - odd parity,1 - even) -----------------' ||
| |Unused ---------------------------------------------'|
$FFFA2B|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer full --------------------------' | | | | | | ||
| |Overrun error --------------------------' | | | | | ||
| |Parity error -----------------------------' | | | | ||
| |Frame error --------------------------------' | | | ||
| |Found - Search/Break detected ----------------' | | ||
| |Match/Character in progress --------------------' | ||
| |Synchronous strip enable -------------------------' ||
| |Receiver enable bit --------------------------------'|
$FFFA2D|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W
| |Buffer empty -------------------------' | | | | | | ||
| |Underrun error -------------------------' | | | | | ||
| |Auto turnaround --------------------------' | | | | ||
| |End of transmission ------------------------' | | | ||
| |Break ----------------------------------------' | | ||
| |High bit ---------------------------------------' | ||
| |Low bit ------------------------------------------' ||
| |Transmitter enable ---------------------------------'|
$FFFA2F|byte |USART data |R/W
-------+-----+-----------------------------------------------------+----------
##############Floating Point Coprocessor (CIR Interface in MSTe) ###########
-------+-----+-----------------------------------------------------+----------
$FFFA40|word |FP_Stat Response-Register |??? (MSTe)
$FFFA42|word |FP_Ctl Control-Register |??? (MSTe)
$FFFA44|word |FP_Save Save-Register |??? (MSTe)
$FFFA46|word |FP_Restor Restore-Register |??? (MSTe)
$FFFA48|word | |??? (MSTe)
$FFFA4A|word |FP_Cmd Command-Register |??? (MSTe)
$FFFA4E|word |FP_Ccr Condition-Code-Register |??? (MSTe)
$FFFA50|long |FP_Op Operand-Register |??? (MSTe)
$FFFA54|word |FP_Selct Register Select |??? (MSTe)
$FFFA58|long |FP_Iadr Instruction Address |??? (MSTe)
$FFFA5C|long | Operand Address |??? (MSTe)
-------+-----+-----------------------------------------------------+----------
##############MFP 68901 #2 (MFP2) - TT Only ###########
-------+-----+-----------------------------------------------------+----------
$FFFA81|byte |Parallel Port Data Register |R/W (TT)
-------+-----+-----------------------------------------------------+----------
$FFFA83|byte |Active Edge Register BIT 7 6 5 4 3 2 1 0|R/W (TT)
| +-----------------------------------------------------+
| | When port bits are used for input only: |
| |0 - Interrupt on pin high-low conversion |
| |1 - Interrupt on pin low-high conversion |
-------+-----+-----------------------------------------------------+----------
$FFFA85|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'|
-------+-----+-----------------------------------------------------+----------
$FFFA87|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA8B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA8F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA93|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |MFP Address | | | | | | | ||
| |$17C TT-SCSI NCR5380 ---------' | | | | | | ||
| |$178 RTC (MC146818A) -----------' | | | | | ||
| |$174 Timer A -------------' | | | | ||
| |$170 Receive buffer full ---------------' | | | ||
| |$16C Receive error -----------------' | | ||
| |$168 Send buffer empty -------------------' | ||
| |$164 Send error ---------------------' ||
| |$160 Timer B -----------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA89|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA8D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA91|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W (TT)
$FFFA95|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |MFP Address | | | | | | | ||
| |$15C SCSI DMA Controller ---------' | | | | | | ||
| |$158 (Reserved) GPIP 4 -----------' | | | | | ||
| |$154 Timer C -------------' | | | | ||
| |$150 Timer D ---------------' | | | ||
| |$14C SCC B Ring Indicator -----------------' | | ||
| |$148 SCC DMA Controller -------------------' | ||
| |$144 General Purpose Input 1 ---------------------' ||
| |$140 General Purpose Input 0 -----------------------'|
| |1 - Enable Interrupt 0 - Disable Interrupt|
-------+-----+-----------------------------------------------------+----------
$FFFA97|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W (TT)
| |Vector Base Offset -------------------+-+-+-' | |
| |1 - *Software End-interrupt mode -------------+ |
| |0 - Automatic End-interrupt mode -------------' |
| |* - Default operating mode |
-------+-----+-----------------------------------------------------+----------
$FFFA99|byte |Timer A Control BIT 4 3 2 1 0|R/W (TT)
$FFFA9B|byte |Timer B Control BIT 4 3 2 1 0|R/W (TT)
| |Reset (force output low) -------------------' | | | ||
| +----------------------------------------------+-+-+-++
| |0000 - Timer stop, no function executed |
| |0001 - Delay mode, divide by 4 |
| |0010 - : : 10 |
| |0011 - : : 16 |
| |0100 - : : 50 |
| |0101 - : : 64 |
| |0110 - : : 100 |
| |0111 - Delay mode, divide by 200 |
| |1000 - Event count mode |
| |1xxx - Pulse extension mode, divide as above |
| +-----------------------------------------------------+
$FFFA9F|byte |Timer A Data |R/W (TT)
$FFFAA1|byte |Timer B Data |R/W (TT)
-------+-----+-----------------------------------------------------+----------
$FFFA9D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W (TT)
| | Timer Timer|
| | C D |
| +-----------------------------------------------------+
| |000 - Timer stop |
| |001 - Delay mode, divide by 4 |
| |010 - : : 10 |
| |011 - : : 16 |
| |100 - : : 50 |
| |101 - : : 64 |
| |110 - : : 100 |
| |111 - Delay mode, divide by 200 |
| +-----------------------------------------------------+
$FFFAA3|byte |Timer C Data |R/W (TT)
$FFFAA5|byte |Timer D Data |R/W (TT)
-------+-----+-----------------------------------------------------+----------
$FFFAA7|byte |Sync Character |R/W (TT)
$FFFAA9|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W (TT)
| |Clock divide (1 - div by 16) ---------' | | | | | | ||
| |Word Length 00 - 8 bits ----------------+-+ | | | | ||
| | 01 - 7 bits ----------------+-+ | | | | ||
| | 10 - 6 bits ----------------+-+ | | | | ||
| | 11 - 5 bits ----------------+-' | | | | ||
| |Bits Stop Start Format | | | | ||
| |00 0 0 Synchronous ----------------+-+ | | ||
| |01 1 1 Asynchronous ---------------+-+ | | ||
| |10 1 1.5 Asynchronous ---------------+-+ | | ||
| |11 1 2 Asynchronous ---------------+-' | | ||
| |Parity (0 - ignore parity bit) -----------------' | ||
| |Parity (0 - odd parity,1 - even) -----------------' ||
| |Unused ---------------------------------------------'|
$FFFAAB|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |Buffer full --------------------------' | | | | | | ||
| |Overrun error --------------------------' | | | | | ||
| |Parity error -----------------------------' | | | | ||
| |Frame error --------------------------------' | | | ||
| |Found - Search/Break detected ----------------' | | ||
| |Match/Character in progress --------------------' | ||
| |Synchronous strip enable -------------------------' ||
| |Receiver enable bit --------------------------------'|
$FFFAAD|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W (TT)
| |Buffer empty -------------------------' | | | | | | ||
| |Underrun error -------------------------' | | | | | ||
| |Auto turnaround --------------------------' | | | | ||
| |End of transmission ------------------------' | | | ||
| |Break ----------------------------------------' | | ||
| |High bit ---------------------------------------' | ||
| |Low bit ------------------------------------------' ||
| |Transmitter enable ---------------------------------'|
$FFFAAF|byte |USART data |R/W (TT)
-------+-----+-----------------------------------------------------+----------
##############6850 ACIA I/O Chips ###########
-------+-----+-----------------------------------------------------+----------
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC02|byte |Keyboard ACIA data |R/W
$FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|W
| |Rx Int enable (1 - enable) -----------' | | | | | | ||
| |Tx Interrupts | | | | | | ||
| |00 - RTS low, Tx int disable -----------+-+ | | | | ||
| |01 - RTS low, Tx int enable ------------+-+ | | | | ||
| |10 - RTS high, Tx int disable ----------+-+ | | | | ||
| |11 - RTS low, Tx int disable, | | | | | | ||
| | Tx a break onto data out ----------+-' | | | | ||
| |Settings | | | | ||
| |000 - 7 bit, even, 2 stop bit --------------+-+-+ | ||
| |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | ||
| |010 - 7 bit, even, 1 stop bit --------------+-+-+ | ||
| |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | ||
| |100 - 8 bit, 2 stop bit --------------------+-+-+ | ||
| |101 - 8 bit, 1 stop bit --------------------+-+-+ | ||
| |110 - 8 bit, even, 1 stop bit --------------+-+-+ | ||
| |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | ||
| |Clock divide | ||
| |00 - Normal --------------------------------------+-+|
| |01 - Div by 16 -----------------------------------+-+|
| |10 - Div by 64 -----------------------------------+-+|
| |11 - Master reset --------------------------------+-'|
$FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|R
| |Interrupt request --------------------' | | | | | | ||
| |Parity error ---------------------------' | | | | | ||
| |Rx overrun -------------------------------' | | | | ||
| |Framing error ------------------------------' | | | ||
| |CTS ------------------------------------------' | | ||
| |DCD --------------------------------------------' | ||
| |Tx data register empty ---------------------------' ||
| |Rx data register full ------------------------------'|
$FFFC06|byte |MIDI ACIA data |R/W
-------+-----+-----------------------------------------------------+----------
##############Realtime Clock ###########
-------+-----+-----------------------------------------------------+----------
$FFFC21|byte |S_Units |???
$FFFC23|byte |S_Tens |???
$FFFC25|byte |M_Units |???
$FFFC27|byte |M_Tens |???
$FFFC29|byte |H_Units |???
$FFFC2B|byte |H_Tens |???
$FFFC2D|byte |Weekday |???
$FFFC2F|byte |Day_Units |???
$FFFC31|byte |Day_Tens |???
$FFFC33|byte |Mon_Units |???
$FFFC35|byte |Mon_Tens |???
$FFFC37|byte |Yr_Units |???
$FFFC39|byte |Yr_Tens |???
$FFFC3B|byte |Cl_Mod |???
$FFFC3D|byte |Cl_Test |???
$FFFC3F|byte |Cl_Reset |???
-------+-----+-----------------------------------------------------+----------
##############ROM ###########
-------+-----+-----------------------------------------------------+----------
$FA0000| | |
: | |128K ROM expansion cartridge port |R
$FBFFFF| | |
-------+-----+-----------------------------------------------------+----------
$FC0000| | |
: | |192K System ROM |R
$FEFFFF| | |
-------+-----+-----------------------------------------------------+----------
Atari 32 bit Memory Map
Addresses Description
-------------------+----------------------------------------------------------
$00000000-$00DFFFFF|ST RAM
$00E00000-$00EFFFFF|512k TOS ROMs
$00F00000-$00F9FFFF|Reserved I/O Space
$00FA0000-$00FBFFFF|128k ROM cartridge expansion port
$00FC0000-$00FEFFFF|192k System ROM
$00FF0000-$00FF7FFF|Reserved I/O Space
$00FF8000-$00FFFFFF|ST/TT I/O
$01000000-$013FFFFF|TT Fast Ram
$01400000-$FDFFFFFF|Reserved
$FE000000-$FEFFFFFF|VME A24/D16
$FEFF0000-$FEFFFFFF|VME A16/D16
$FF000000-$FFFFFFFF|ST 24 bit compatible shadow
$FFD000xx-$FFD000xx|Set FastRAM refresh rate and generate a bus error
-------------------+----------------------------------------------------------
Cookie Jar
Atari "Official" Cookies
Cookie Description
-------+----------------------------------------------------------------------
_CPU | CPU Type Bit 7 6 5 4 3 2 1 0
| Processor type is represented in decimal in the lowest byte.
| (0 - 68000, 40 - 68040)
-------+----------------------------------------------------------------------
_VDO | Video Type BIT 17 16
| Shifter Type | |
| 00 - ST ---------------------------------------------------------+--+
| 01 - STe --------------------------------------------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
-------+----------------------------------------------------------------------
_FDC | Floppy Drive Controller BIT 25 24 . 23-0
| Floppy Format | | |
| 00 - DD (Normal floppy interface) ------------------------+--+ |
| 01 - HD (1.44 MB with 3.5") ------------------------------+--+ |
| 10 - ED (2.88 MB with 3.5") ------------------------------+--' |
| Controller ID |
| 0 - No information available |
| 'ATC' - Fully compatible interface built in a way that -------------+
| behaves like part of the system. |
| 'DP1' - "DreamPark Development", all ID's beginning with -----------'
| "DP" are reserved for Dreampark.
-------+----------------------------------------------------------------------
_FLK | File Locking
| If present, GEMDOS supports file locking. Value represents version
| number of the expansion.
-------+----------------------------------------------------------------------
_NET | Network Type
| If present, there is GEMDOS network support. Points to 2 longs:
| The first is the ID of the producer, and the second is the version
| number.
-------+----------------------------------------------------------------------
_SLM | SLM Driver
| Diablo-driver for the SLM laser printer. Value points to a
| non-documented structure.
-------+----------------------------------------------------------------------
_INF | .INF Patch
| When present, STEFIX (patch program for TOS 1.06) is active.
-------+----------------------------------------------------------------------
_SND | Sound Hardware BIT 5 4 3 2 1 0
| CodeC (??) -----------------------------------------------' | | | | |
| Connection Matrix ------------------------------------------' | | | |
| DSP56001 -----------------------------------------------------' | | |
| 16 Bit DMA Sound -----------------------------------------------' | |
| 8 Bit DMA Sound --------------------------------------------------' |
| YM2149 -------------------------------------------------------------'
-------+----------------------------------------------------------------------
_MCH | Machine Type BIT 17 16
| 00 - ST/Mega ST -------------------------------------------------+--+
| 01 - STe & Compatible Machines (See Below) ----------------------+--+
| 10 - TT ---------------------------------------------------------+--+
| 11 - Falcon030 --------------------------------------------------+--'
| STe & Compatible Machines BIT 5 4 3 2 1 0
| 00000 - STe ----------------------------------------------+-+-+-+-+-+
| 00001 - ST Book ------------------------------------------+-+-+-+-+-+
| 10000 - Mega STe -----------------------------------------+-+-+-+-+-'
-------+----------------------------------------------------------------------
_SWI | Configuration Switches
| State of configuration switches (MSTe/TT only)
-------+----------------------------------------------------------------------
_FRB | Fast Ram Buffer
| (TT specific) 64k buffer for ACSI DMA
| 0 - no buffers assigned Not 0 - address of FastRam buffer
-------+----------------------------------------------------------------------
_FPU | FPU Type
| Software FPU BIT 3 2 1 0
| 68040's internal FPU -----------------------------------------' | | |
| 01 - 6888x present ---------------------------------------------+-+ |
| 10 - 68881 for sure --------------------------------------------+-+ |
| 11 - 68882 for sure --------------------------------------------+-' |
| SFP004 present -----------------------------------------------------'
| Hardware FPU BIT 11 10 9 8
| 68040's internal FPU ----------------------------------------' | | |
| 01 - 6888x present ---------------------------------------------+-+ |
| 10 - 68881 for sure --------------------------------------------+-+ |
| 11 - 68882 for sure --------------------------------------------+-' |
| SFP004 present -----------------------------------------------------'
-------+----------------------------------------------------------------------
_OOL | PoolFix
| Value corresponds to PoolFix version
-------+----------------------------------------------------------------------
_AKP | Keyboard/Language Configuration
| Keyboard Configuration Bit 15-8
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
| Language Configuration BIT 7-0
| 1 - German 5 - Italian -------------------------------------------+
| 2 - French 7 - Swiss French --------------------------------------+
| 4 - Spanish 8 - Swiss German --------------------------------------+
| All others - English -----------------------------------------------'
-------+----------------------------------------------------------------------
_IDT | International Date/Time Format
| Time Format BIT 12
| 0 - AM/PM, 1 - 24 hours --------------------------------------------+
| Date Format BIT 9 8
| 00 - MMDDYY ------------------------------------------------------+-+
| 01 - DDMMYY ------------------------------------------------------+-+
| 10 - YYMMDD ------------------------------------------------------+-+
| 11 - YYDDMM ------------------------------------------------------+-'
| Separator for date BIT 7-0
| ASCII Value (i.e. "." or "/") --------------------------------------'
-------+----------------------------------------------------------------------
MiNT | MiNT
| Present if MiNT/MultiTOS is active. Value represents the version
| number of the MiNT kernel in hex (0x104 = 1.04)
-------+----------------------------------------------------------------------